ghost parts and accessories

Listed below are all the parts found in our ghost preamp kits as well as some popular optional accessories to customize your build. 

PD-0103-01 PD-0103-01 : Ghost Stereo Switch Jack

$21.55 USD
Learn More Add to Cart
The PD-01030-01 is the Stereo Switched Output Jack (4 contacts) used in the Acousti-Phonic Preamp kits.  Replaces your 1/4" output jack and provides automatic Stereo/Mono mode switching and power on/off functions.

PD-0205-00 PD-0205-00 : Ghost Battery Clip

The PD-0205-00 holds the battery for the Acousti-Phonic securely inside your guitar or bass. Mounts inside the control cavity with included self-adhesive foam tape.

PD-0240-00 PD-0240-00 : Ghost Acousti-Phonic Preamp Board

$59.35 USD
Learn More Add to Cart
The PD-0240-00 is a replacement Acousti-Phonic preamp board EQ'd for Guitar. Replaces the board included in the PE-0240-00, PK-0240-00, and PK-0680-00.

PD-0340-00 PD-0340-00 : Ghost Bass Acousti-Phonic Preamp Board

$59.35 USD
Learn More Add to Cart
The PD-0340-00 is a replacement Acousti-Phonic preamp board EQ'd for Bass. Replaces the board included in the PE-0340-00, PK-0340-00, and PK-0780-00.

PD-0440-00 PD-0440-00 : Ghost Hexpander Preamp Board

$140.35 USD
Learn More Add to Cart
The PD-0440-00 is a replacement Hexpander MIDI Interface board. Replaces the board included in the PE-0440-00, PK-0440-00, PK-0680-00, and PK-0780-00. 

PD-0512-00 PD-0512-00 : Ghost Interface Wiring Harness

The PD-0512-00 connects the Hexpander MIDI Interface board to the 13-pin Jack. 12 inches long. This harness has 16 holes, and on each end one hole is blocked to "key" the connector so it can't be plugged into the Hexpander or 13-pin jack the wrong way.

PD-0810-00 PD-0810-00 : 1/4" STEREO "Y" CABLE

Premium "Y" cable allows for the stereo split output of the Acousti-Phonic (mags on tip, piezos on ring). 1 TRS (male) to 2 TS (female) *Ring side has red colored strain relief*.

PE-0106-00 PE-0106-00 : Ghost Acousti-Phonic Mid/Dark Switch

$34.95 USD
Learn More Add to Cart
The PE-0106-00 is a Volume harness for the Acousti-Phonic with a 2-position toggle switch that selects two EQ settings for the acoustic output.  The first is the classic Acousti-Phonic tone and the other adds in a mid/dark boost.

PE-0111-00 PE-0111-00 : Ghost QuickSwitch

$28.95 USD
Learn More Add to Cart
The PE-0111-00 is a 3-position switch that lets you instantly switch between mag/both/acoustic when plugged into the Acousti-Phonic.

PE-0180-00 PE-0180-00 : Ghost Hexpander - Momentary Up/Down Switch

$34.95 USD
Learn More Add to Cart
The PE-0180-00 is an optional control for the Hexpander MIDI Interface. This switch allows you to scroll up and down through your MIDI converter's sounds.  It's the same as what some converters call an S1/S2 switch.

PE-0181-00 PE-0181-00 : Ghost Hexpander Volume Pot and Assembly

$28.95 USD
Learn More Add to Cart
The PE-0180-00 is an optional control for the Hexpander MIDI Interface, this volume pot allows you to adjust your MIDI converter's volume without taking your hands off your guitar or bass.

PE-0182-G0 PE-0182-G0 : Ghost Hexpander Pin 7 Harness

$14.95 USD
Learn More Add to Cart
The PE-0182-G0 is used If you are installing the Hexpander without the Acousti-Phonic and allows you to have signal transmission (magnetic pickups and/or raw piezo signal) run down pin 7 of your 13 pin cable.

PE-0204-00 PE-0204-00 : Ghost Acousti-Phonic Battery Holder

The PE-02040-00 connects to the 9v battery and into the Acousti-Phonic preamp board.

PE-0206-00 PE-0206-00 : Ghost Acoustic Volume with Mid/Dark Switch

$52.35 USD
Learn More Add to Cart
The PE-0206-00 is the volume pot for the Acousti-Phonic with an incorporated push/pull switch that selects two EQ settings for the acoustic output -- the classic, dark ghost sound, and one with a boost in the mid range (around 2KHz).

PE-0211-00 PE-0211-00 : Ghost Acousti-Phonic 9V Battery Box

$17.95 USD
Learn More Add to Cart
The PE-0211-00 is an optional battery box for any of the Acousti-Phonic preamp kits.  It has all the plug in connectors needed for the preamp.  This makes changing your battery quick and simple.

PE-0511-00 PE-0511-00 : Ghost Extension Wiring Harness

The PE-0511-00 is like an extension cord, the Extension Wiring Harness allows you to locate the ghost modules farther away from the pickups. Plugs directly into the Hexpander, or into the Summing Board for use with the Acousti-Phonic.

PE-0540-00 PE-0540-00 : Ghost Hexpander 13 Pin Input Jack

$59.35 USD
Learn More Add to Cart
The PE-0540-00 is a 13-pin Jack for Hexpander, with Traktion switch to select tracking curve for Roland or Axon converters.  It includes mounting plate and all the screws, bolts, and washers.

PE-5002-00 PE-5002-00 : Ghost Volume Pot Assembly

The PE-5002-00 is a cable assembly to solder to a regular 250K or 500K volume pot so that it can plug into the Acousti-Phonic and control the acoustic volume. Also includes wires to connect your mags to the Acoust-Phonic.

PE-5003-00 PE-5003-00 : Ghost Acousti-Phonic Stereo Switched Jack Cable Assembly

The PE-5003-00 is the cable assembly to solder to the Stereo Switched Output Jack and plug into the Acousti-Phonic.

PE-5017-00 PE-5017-00 : Ghost Acousti-Phonic Summing Board

The PE-5017-00 is the Summing Board connects the ghost pickups together into the Acousti-Phonic.  This component is included with the PE-0240-00, PE-0340-00, PK-0680-00 and PK-0780-00.

PE-5021-00 PE-5021-00 : Ghost Acousti-Phonic Dual Connector Cable

The PE-5021-00 is used to connect the Summing Board to the Acousti-Phonic. This component is included with the PE-0240-00, PE-0340-00, PK-0680-00 and PK-0780-00.

PW-1022-00 PW-1022-00 : Ghost Wooden Knob Stacked Set of 3

$29.95 USD
Learn More Add to Cart
The PW-1022-00 is a set of three stacked rosewood knobs to be used with either the PK-7077-00 or PK-8077-00 ghost preamp kits.