Model 5000-00 Nut Slotted Flat or Curved Bottom R9.5 L42.85mm (Select Material)
Model 5000-00 Nut Slotted Flat or Curved Bottom R9.5 L42.85mm (Select Material)
PQL-5000-00
702725102037
Couldn't load pickup availability
The 5000-00 is a perfect option to replace and upgrade the nut in almost all Fender-style electric guitars.
It will work in both a flat bottom or curved bottom nut slot due to its ingenious design, sand off the tab for a curved bottom.
It is pre-slotted to make for a quick and easy install.
9.5" Radius.
PQL-5000-AG - nut has an "aged" look to match the vintage look of your guitar.
The PT-5000-00 is also available in a convenient luthier 10-pack (LT-5000-10).
| Measure | Length | Thickness | Height | Str.Sp |
| inches | 1.687” | 0.128” | 0.198” | 1.39” |
| mm | 42.85 | 3.25 | 5.03 | 35.31 |
R-9.5
View full details
What is the Difference in TUSQ Materials?
TUSQ
TUSQ nuts have a rich tone without the inconsistency found in ivory, bone, and other natural materials. Bone and ivory have hard and soft spots (grain) throughout each piece, hampering the consistent transfer of vibrations to the guitar top. TUSQ nuts are designed to transfer the right frequencies more efficiently from the string to the guitar body.
Best for Acoustic Guitars.
TUSQ XL and Black TUSQ XL
TUSQ XL and Black TUSQ XL nuts are designed to boost guitar tone and performance. These precision-engineered nuts are made with a specially formulated material that couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note. It is based on the highly resonant TUSQ man-made ivory but is permanently lubricated to improve the tuning performance of the guitar.
Best for Electric Guitars and BASS.
- JMJames M.Verified BuyerRated 5 out of 5 stars1 month agoStratocaster 9.5 radius nut
I have never had a problem with your products before and I have built many guitars. I just bought a new Fender neck and I don’t know why they are doing what they are doing. There was no way to get your product to work without altering the neck slot. The neck was too expensive to void the warranty. Fender use to have the slot in the middle of the nut canal and the slot was too narrow so I couldn’t use the nut. But I will use the nut eventually
- FIFabio I.Verified BuyerRated 4 out of 5 stars3 months agoReview
I had to file a little from the ends because it extended over the neck.
Otherwise, well done.
- DDDavid D.Verified BuyerRated 4 out of 5 stars4 months agoModel 5000-00 Nut Slotted Flat or Curved Bottom R9.5 L42.85mm (Select Material)
The material is amazing and I love the tone I get with this nut However I was fitting it to a telecaster with 9.5 curved radius neck I had to sand a ton of material off the bottom for it to fit properly, but the way I understand it is that this is the only curved bottom nut graphtech sells. Overall I got it to fit and it works well.
- FEFrancois E.Verified BuyerRated 5 out of 5 stars6 months agoGreat!
Good nutt,….but i found my hand is too large for a 9.5 radiused neck….so im gonna have to get a 12” inch radiused nut in future…
- PCPaul C.Verified BuyerRated 5 out of 5 stars7 months agoSaved my guitar...
I replaced the factory-installed nut on my Fender neck with this new Graph Tech nut and greatly improved the string alignment and tuning stability of my Stratocaster. The string alignment with the factory nut was so bad, I just didn't like playing the guitar. With this new Graph Tech nut, I feel like I have a new guitar! Thank you Graph Tech!