Model 5072-00 Nut Slotted Flat or Curved Bottom R7.25 L43.18mm (Select Material)
Model 5072-00 Nut Slotted Flat or Curved Bottom R7.25 L43.18mm (Select Material)
PQL-5072-00
702725242238
Couldn't load pickup availability
If you have a Fender guitar or re-issue from the 1950s-60s or 70s, this is your nut! A 7.25" radius, works with a curved or flat bottom and is permanently lubricated for great tuning stability. It works in both a flat bottom or curved bottom nut slot due to its ingenious design, sand off the tab for a curved bottom.
It is pre-slotted to make for a quick and easy install.
For just about all Fender electric guitars made in the 1950s, '60 and ’70s… that’s a lot!
The 7.25” fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius.
| Measure | Length | Width | Height | Str.Sp |
| inches | 1.7” | 0.13” | 0.213” | 1.39” |
| mm | 43.18 | 3.3 | 5.41 | 35.31 |
R-7.25
View full details
What is the Difference in TUSQ Materials?
TUSQ
TUSQ nuts have a rich tone without the inconsistency found in ivory, bone, and other natural materials. Bone and ivory have hard and soft spots (grain) throughout each piece, hampering the consistent transfer of vibrations to the guitar top. TUSQ nuts are designed to transfer the right frequencies more efficiently from the string to the guitar body.
Best for Acoustic Guitars.
TUSQ XL and Black TUSQ XL
TUSQ XL and Black TUSQ XL nuts are designed to boost guitar tone and performance. These precision-engineered nuts are made with a specially formulated material that couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note. It is based on the highly resonant TUSQ man-made ivory but is impregnated with PTFE to improve the tuning performance of the guitar.
Best for Electric Guitars and BASS.